Low Smoke Zero Halogen Cable

Zero halogen cable refers to the rubber material that does not contain halogen (F, CL, Br, I, At), and does not contain environmental substances such as lead, cadmium, mercury, etc. It will not emit toxic fumes (such as hydrogen halide, hydrogen halide, Carbon monoxide, carbon dioxide, etc.) environmentally friendly cables.

The halogen index is: the value of all halogens ≤50PPM (according to regulations PREN 14582) The content of hydrogen halide gas produced after combustion is less than 100PPM (according to the regulations EN5067-2-1) The PH value of the hydrogen halide gas produced after combustion is ≥4.3 (weak acidity) after being dissolved in water, (according to the regulations EN50267-2-2)

The product passes through a beam of light after burning in a closed container, and its light transmittance is ≥60% (according to the regulations EN50268-2),Pb<90PPM, Cd, Cr6+, Hg, PBBs, PBDEs are all less than 5PPM.

Technical data

Rated voltage: 0.6 kW

Maximum conductor temperature: normal line (90°C), short circuit does not exceed 5 s (the maximum temperature of the conductor must not exceed 250°C)

Minimum ambient temperature: If the ambient temperature is lower than 0°C, the cable should be preheated

Minimum bending radius: single-core cable 20 (d+D) ±5%, multi-core cable 15 (d+D) ±5%

Model

Type	Description	Cores	Nominal Cross Section
WDZA-YJY	Copper conductor/XLPE insulation Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) flame-retardant Power Cable	1, 2, 3, 4, 3+1,	1.5~800mm2
WDZB-YJY		5, 4+1, 3+2
WDZC-YJY
WDZA-YJY23 WDZB-YJY23 WDZC-YJY23	Copper conductor/XLPE insulation/Steel Tape Armored Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) flame-retardant Power Cable	1, 2, 3, 4, 3+1,	1.5~800mm2
		5, 4+1, 3+2
WDZA-YJY33 WDZB-YJY33 WDZC-YJY33	Copper conductor/XLPE insulation/Steel Wire Armored Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) flame-retardant Power Cable	1, 2, 3, 4, 3+1,	1.5~800mm2
		5, 4+1, 3+2
WDZA-YJLY WDZB-YJLY WDZC-YJLY	Aluminum conductor/XLPE insulation Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) flame-retardant Power Cable	1, 2, 3, 4, 3+1,	1.5~800mm2
		5, 4+1, 3+2
WDZA-YJLY23 WDZB-YJLY23 WDZC-YJLY23	Aluminum conductor/XLPE insulation/Steel Tape Armored Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) flame-retardant Power Cable	1, 2, 3, 4, 3+1,	1.5~800mm2
		5, 4+1, 3+2
WDZA-YJLY33 WDZB-YJLY33 WDZC-YJY33	Aluminum conductor/XLPE insulation/Steel Wire Armored Low Smoke Halogen Free or Zero Halogen (LSHF or LSZH) flame-retardant Power Cable	1, 2, 3, 4, 3+1,	1.5~800mm2
		5, 4+1, 3+2

Advantages of zero halogen power cable

The cable is characterized by halogen-free and low-smoke and low-halogen and low-smoke. When a fire occurs, the propagation speed is slow, the smoke concentration is low, the visibility is high, and the release of harmful gases is small, which is convenient for evacuation. The combustion gas is less corrosive, and damage to instruments and equipment is avoided. The characteristics of low halogen and halogen-free make the cable material greatly improve its aging, resistance, anti-ultraviolet and other anti-radiation properties, thereby prolonging the service life of the cable.

Scope of use

The product has excellent flame retardant performance, little smoke during combustion, and no corrosive gas overflow. It is widely used in nuclear power plants, subway stations, telephone exchanges and computer control centers, high-rise buildings, hotels, radio and television stations, important military facilities, and oil platforms Etc., and places where people are concentrated and air density is low.

Low Smoke Zero Halogen Cable